|
NUTEC Components Inc. |
|
Your Partner in Precision |
|
NOTES: · All trajectory data based on axis uniformly supported over full length on precision mounting surface with vibration isolation. · Payload capacities are recommended values to achieve maximum lifetime in the worst-case scenario featuring maximum dynamic operation and off-center loading. · Force, acceleration and speed performance are based on operations with NUTEC ELECTRONIC controls. |
|
|
MTC1050 |
MTC1100 |
MTC1500 |
MTC2000 |
|
Travel Length (mm) |
50 |
100 |
150 |
200 |
|
Trajectory Control |
|
|
|
|
|
Accuracy |
|
|
|
|
|
Standard Precision SP |
± 8 µm |
± 12 µm |
± 15 µm |
± 20µm |
|
Straightness/Flatness |
|
|
|
|
|
Standard SP |
± 6 µm |
± 10 µm |
± 12 µm |
± 15 µm |
|
Yaw/Pitch/Roll |
|
|
|
|
|
Standard SP |
10 arc-sec |
10 arc-sec |
10 arc-sec |
10 arc-sec |
|
2 axis system |
|
|
|
|
|
Orthogonality |
|
|
|
|
|
Standard SP |
20 arc-sec |
20 arc-sec |
20 arc-sec |
20 arc-sec |
|
|
MTC-100-SP |
|
Travel Length (mm) |
25- 200 |
|
Drive System |
Step motor Servo motor |
|
Maximum Acceleration |
Payload Dependent |
|
Maximum Speed |
Roller leadscrew Drive 40 mm/s |
|
Maximum Peak Force |
To match application |
|
Maximum Continuous Force |
To match application |
|
Recommended Maximum Load |
|
|
L1 Parallel to base |
25 kg |
|
L2 Tension Perpendicular to base |
25 kg |
|
L3 Compression Perpendicular to base |
25 kg |
|
Feedback |
Non-Contact Rotary Encoder System |
|
TTL resolution |
1μ per pulse, |
|
Repeatability |
5x Resolution |
|
Construction |
Aluminum Alloy Body Hard Coat Gray Anodize |