Tracline-6 Features & Benefits

The precision-ground ball screw offers application versatility by providing high speed without sacrificing resolution or accuracy. This drive screw mechanism is integrally preloaded for a play-free operation and features low hysteresis which improves bi-directional repeatability. Available with a standard 10 mm pitch or optional 5 mm fine-pitch ball screw drive, and an optional linear encoder system Tracline positioning stages are configurable to numerous medium duty and high precision applications.

Constant support geometry creates a mechanical bearing platform where the saddle is always supported at the load point in an identical way over the entire length of travel. This creates a trajectory with lower excursions. The pre-loaded multi-track precision linear guide system with four bearing carriages together with the mono-block extruded high-strength aluminum alloy base achieve higher accuracy and stiffness and superior flatness and straightness not affected by moment loading and load location

Applications

Tracline positioning stages are designed as versatile high performance modules. Selected high-performance components are combined with precision fabricated machined components to achieve outstanding positioning performance with extended life expectancy. The stage base is fabricated from a specially selected hardened high-strength aluminum alloy slab, precision machined to extremely close tolerances. In addition, the saddle is equipped with a wear resistant hard-coat anodized protective finish.

Tracline-6 Specifications

NUTEC Components Inc.

Your Partner in Precision

Contact 

   Print

Tracline-6

Tracline-6 Modular screw driven linear translation stages combine precision features into a rugged, versatile stage design, suitable for use in automated, inspection, measurement and fabrication processes.

Product Summary

· Precision ground ball screw

· Long-life linear motion guide bearing system

· Low-cost high performance stage

· Optional bellows way covers

· Optional hard cover with CLS sealing

TRACLINE-6

Notes:

· All trajectory data based on axis uniformly supported over full length on precision mounting surface with vibration isolation.

· Payload capacities are recommended values to achieve maximum lifetime in the worst-case scenario featuring maximum dynamic operation and off-center loading.

· Force, acceleration and speed performance are based on operations with NUTEC ELECTRONIC controls.

NUTEC COMPONENTS INC.

Tel:           866-44NUTEC

Fax:          631-242-1310